Rick Edsall

Jan 27, 2016

0 Comment

Surface Preparation Before Applying Industrial Floor Coating

Buckeye_Nissan_Before-645x305

Surface Preparation Before Applying Industrial Floor Coating

If you want your industrial floor professionally restored, the processes needs to be comprehensive so that your floors will be robust and in top condition for many years in the future. Carrying out surface preparation before applying industrial floor coating is regarded as the most crucial stage of resinous flooring applications, and if this is not done correctly and to professional standards, it could result in you suffering a costly, time consuming repair procedure.

In order to make your floors look the best they can be, surface preparation is carried out using grinding, shot blasting and scarifying techniques. For example, in the case of old concrete, the first job is ensuring that surfaces are structurally sound before the resinous installation. At this stage, grinding, shot blasting, sandblasting, and rough sanding are utilized to take away scale, loose concrete, and existing paint. If possible, a stripper might be employed to take off excessive sealer or paint build-up. The mechanical preparation of structurally sound concrete is done to eliminate all forms of contamination, and the top process for a first-class bonding profile is vacuum shot blasting.

Prior to the application of any Epoxy Flooring System products, your industrial floor surface has to be inspected for signs of vapor transmission. In the case of new concrete, your floor should be dry and well cured before it is coated, unless green concrete primer is utilized, the cure needs to last for at least 28 days. All laitance, grease, oil, or other unwanted material is removed, and steam cleaning is carried out using a heavy de-greaser. Mechanical methods such as grinding, scarification, and vacuum blasting, are employed to take away laitance and foreign material. When concrete is new, it can be prepared mechanically through grinding, scarifying, sand blasting, or vacuum shot-blasting, and it can also be acid etched.

De-greasing compounds or solvents are utilized to take away grease, oil, and other foreign materials, and then mechanical abrasion, sandblasting, or sanding is done to remove all rust and scaling.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

 

Top